JUNOSe 9.1.x System Basics Configuration Guide > Managing the System > Overview

Overview

Managing the E-series router involves a variety of tasks. This chapter covers those tasks associated with the router in general rather than specific networking protocols. Each section in the chapter covers a different topic; where appropriate, a section contains an overview of the topic, configuration tasks, and information about monitoring the associated settings.

For additional management information, CLI commands, and procedures, refer to the following table.

 Task
 Reference

 Find detailed information about commands described in this chapter.

 JUNOSe Command Reference Guide A to M and JUNOSe Command Reference Guide N to Z


 Configure the system as an SNMP agent.

 Chapter 4, Configuring SNMP


 Set system passwords.

 Chapter 9, Passwords and Security


 Write CLI macros.

 Chapter 10, Writing CLI Macros


 Boot the system.

 Chapter 11, Booting the System


 Manage line modules and SRP modules.

 Chapter 6, Managing Modules