[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

JUNOSe 9.1.x System Basics Configuration Guide > Booting the System > Operations in Boot Mode

Operations in Boot Mode

To access Boot mode:

  1. Reload the system from Privileged Exec mode:
    2. host1#reload

    WARNING: Execution of this command will cause the system to reboot.

    Proceed with reload? [confirm]

    Reload operation commencing, please wait...

    7
  2. Press the <mb > key sequence (case-insensitive) during the countdown that is displayed immediately after the BPOST tests are bypassed. This puts the CLI in Boot mode. 
    3. :boot##

If you do not press the <mb> key sequence before the countdown timer expires, the reloading process continues and returns the CLI to the normal User Exec mode.

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]