JUNOSe 9.1.x Quality of Service Configuration Guide > Monitoring QoS on E-series Routers > Monitoring the QoS Configuration of IEEE 802.3ad Link Aggregation Group Bundles

Monitoring the QoS Configuration of IEEE 802.3ad Link Aggregation Group Bundles

Purpose

Display information about the QoS configuration for Ethernet member links in all IEEE 802.3ad link aggregation group (LAG) bundles configured on the router, or about the member links in a specified IEEE 802.3ad LAG bundle.

Action

To display the QoS configuration for a specific LAG bundle:

host1#show interfaces lag lg0 members

Lag lg0 is Up, Administrative status is Up

MAC Address is 0090.1a40.01be

MTU: Operational 1526

Duplex Mode: Operational Full Duplex

Speed: Operational 100 Mbps

System Priority 32768 System MAC Address is 0090.1a00.00e0 key 8

Partner System Priority 0 System MAC Address is 0000.0000.0000 key 0

QoS parameter: vlan 1500000

Attached QoS profile: eth1

Member-interface FastEthernet11/2 is Up

(LACP disabled, state collecting/distributing)

Member-interface FastEthernet11/3 is Down

(LACP disabled, state waiting)

Member-interface FastEthernet11/4 is Up

(LACP disabled, state collecting/distributing)

Meaning

Table 52: show interfaces lag members Output Fields 

Field Name	Field Description
Lag	Name of the LAG bundle
QoS parameter	QoS parameter instance at the displayed interface
Attached QoS profile	QoS profile attachment at the displayed interface

Table 52 lists the related show interfaces command output fields.

Related Topics

• Configuring the Scheduler Hierarchy for Hashed Load Balancing in 802.3ad Link Aggregation Groups
• Configuring the Scheduler Hierarchy for Subscriber Load Balancing in 802.3ad Link Aggregation Groups
• Creating Parameter Instances
• For more information about other fields displayed with this command, see the JUNOSe Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces
• show interfaces lag members command