[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]


Example: Configuring Color-Blind RED

You can configure RED so that packets are dropped without regard to color. To do so, you combine a drop profile that has a committed threshold configured with a queue profile that specifies the same queue length for committed, conformed, and exceeded packets, as shown in Figure 3.


Figure 3: Color-Blind RED Drop Profile with Colorless Queue Profile

In the following example, the drop profile and queue profile combine to specify the following:

host1(config)#drop-profile nocolor
host1(config-drop-profile)#committed-threshold percent 30 90 5
host1(config-drop-profile)#exit
host1(config)#queue-profile colorless
host1(config-queue)#committed-length 100000 100000 
host1(config-queue)#conformed-fraction 100
host1(config-queue)#exceeded-fraction 100 

To achieve the same drop treatment for each color, you can specify color-blind RED in combination with a color-sensitive queue profile, as shown in Figure 4.


Figure 4: Color-Blind RED Drop Profile with Color-Sensitive Queue Profile

In the following example, the drop profile and queue profile combine to specify the following:

Related Topics


[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]