JUNOSe 9.1.x Policy Management Configuration Guide > Monitoring Policy Management > Monitoring the Policy Configuration of Frame Relay Subinterfaces

Monitoring the Policy Configuration of Frame Relay Subinterfaces

Purpose

Display information about a subinterface's Frame Relay policy lists.

Action

To display information about Frame Relay policy lists:

host1#show frame-relay subinterface 

Frame relay sub-interface SERIAL5/0:1/1.1, status is up

Number of sub-interface down transitions is 0

Time since last status change 03:04:59

No baseline has been set

  In bytes: 660                    Out bytes: 660                 

  In frames: 5                     Out frames: 5                   

  In errors: 0                     Out errors: 0                   

  In discards: 0                   Out discards: 0                   

  In unknown protos: 0                   

Frame relay policy output frOutputPolicy

  classifier-group frGroupA entry 1

     5 packets, 640 bytes

     mark-de 1

Frame relay sub-interface SERIAL5/1:1/1.1, status is up

Number of sub-interface down transitions is 0

Time since last status change 03:05:09

No baseline has been set

  In bytes: 660                    Out bytes: 660                 

  In frames: 5                     Out frames: 5                   

  In errors: 0                     Out errors: 0                   

  In discards: 0                   Out discards: 0                   

  In unknown protos: 0                   

Frame relay policy input frInputPolicy

  classifier-group frMatchDeSet entry 1

      5 packets, 660 bytes

      color red

Meaning

Table 26 lists the show frame-relay subinterface command output fields.

Table 26: show frame-relay subinterface Output Fields

Field Name	Field Description
Frame Relay policy	Type and name of the VLAN policy
mark-de	DE bit value
color	Color applied to packet flow for queuing: green, yellow, or red
classifier-group	Name of the classifier control list used by the policy
filter	Filter policy action
forward	Forward policy action
traffic class	Traffic class in the policy list
user-packet-class	User packet class in the policy list

Related Topics

• show frame-relay subinterface command