JUNOSe 9.1.x Policy Management Configuration Guide > Monitoring Packet Mirroring > Monitoring Packet Mirroring Triggers

Monitoring Packet Mirroring Triggers

Purpose

Display CLI-based packet mirroring information about all packet mirroring triggers (active and inactive) that are configured on the router. This command and the output are visible only to authorized users—the mirror-enable command must be enabled prior to using this command.

Action

To display information about all packet mirroring triggers:

host1#show mirror rules

Total Mirror Rules Configured: 6

Subscriber ID                  Subscriber ID       Secure Policy  Secure Policy List  Sessions 

                               Method              Type                               Mirrored

------------------             ------------------  -------------  ------------------  --------

default: user@isp250.com       username            ip             securePolicyIp      4

vpn: fred@isp100.com           username            ip             securePolicyVpn     0

default: 192.168.10.1          ip address          ip             securePolicyIp      1

vpn: 10.10.2.2                 ip address          l2tp           securePolicyVpn     0

5551212                        calling station id  l2tp           securePolicyL2tp    1

erx atm 2/1.2:0.42:0001048579  acct-session-id     ip             securePolicyIp      1

Meaning

Table 54: show mirror rules Output Fields

Field Name	Field Description
Subscriber ID	Identification of the subscriber
Subscriber ID Method	Method used to identify the subscriber
Secure Policy Type	Type of secure policy; IP or L2TP
Secure Policy List	Name of secure policy list used for packet mirroring
Sessions Mirrored	Number of sessions currently being mirrored

Table 54 lists show mirror rules command output fields.

Related Topics

• show mirror rules command