JUNOSe 9.1.x Policy Management Configuration Guide > Monitoring Packet Mirroring > Monitoring the Packet Mirroring Configuration of IP Interfaces

Monitoring the Packet Mirroring Configuration of IP Interfaces

Purpose

Display CLI-based packet mirroring configuration information for a specific interface or for all interfaces on which mirroring is enabled.

NOTE: This command is deprecated and might be removed completely in a future release. The function provided by this command has been replaced by the show secure policy-list command.

Action

To display information about a specific interface or for all interfaces:

host1#show ip mirror interface atm 5/0.1

    Interface          Analyzer Port      Analyzer next-hop 

------------------- ------------------- ---------------------

ATM5/0.1             FastEthernet3/0       192.168.1.1

Meaning

Table 52: show ip mirror interface Output Fields

Field Name	Field Description
Interface	Interface being mirrored
Analyzer Port	Interface to which the mirrored traffic is sent, and that then sends the traffic to the analyzer device
Analyzer next-hop	IP address of the next hop to the analyzer device; displayed when the analyzer interface is a shared medium

Table 52 lists the show ip mirror interface command output fields.

Related Topics

• show ip mirror interface command