Index
A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z
A
- access lists, IP
- specifying multicast groups 1
- access lists, IPv6
- specifying multicast groups 1
- advertising DVMRP routes 1, 2
- assert messages 1
- assigning multicast groups 1, 2
- audience for documentation 1
- auto-RP router
- PIM sparse mode 1
- PIM sparse-dense mode 1
B
- baseline commands
- baseline ip dvmrp 1
- baseline ip igmp 1
- baseline ip igmp-proxy interface 1
- baseline ipv6 mld 1
- baseline ipv6 mld-proxy interface 1
- BFD (Bidirectional Forwarding Detection)
- RIP, configuring for 1, 2
- BGP multicasting 1, 2
C
- Class D IPv4 addresses 1
- clear ip commands
- clear ip dvmrp route 1
- clear ip mroute 1
- clear ip pim auto-rp 1
- clear ip pim interface count 1, 2
- clear ipv6 commands
- clear ipv6 mroute 1
- clear ipv6 pim remote-neighbor count 1
- conventions defined
- icons 1
- text and syntax 1
- customer support, contacting 1
D
- data MDT, creating 1
- data path failure
- detecting RIP 1, 2
- debug commands
- debug ip pim 1
- debug ipv6 pim 1
- default MDT, creating 1
- detecting RIP data path failure 1, 2
- disable command 1
- disable-dynamic-redistribute command
- DVMRP 1
- disabling dynamic route redistribution
- DVMRP 1
- Distance Vector Multicast Routing Protocol. See DVMRP1
- documentation set, E-series and JUNOSe 1
- comments on 1
- obtaining 1
- downstream interface 1, 2
- DRs (designated routers)
- PIM routing 1, 2
- DVMRP (Distance Vector Multicast Routing Protocol)
- advertising routes 1, 2
- configuring
- limits 1
- summary addresses 1
- default router, configuring 1
- deleting routes 1
- enabling
- on a virtual router 1
- on an interface 1
- exchanging unicast routes 1
- filtering reports 1
- metric 1
- monitoring 1, 2
- neighbors 1
- overview 1
- pruning 1
- summary addresses 1
- tunnels 1
- using with IGMP 1
- using with PIM 1, 2
- dynamic route redistribution, disabling
- in DVMRP 1
E
- E120 routers 1, 2
- E320 routers 1, 2
- encapsulation commands
- encapsulation vlan 1, 2
- ERX-14xx models 1
- ERX-310 router 1
- ERX-7xx models 1
- E-series and JUNOSe documentation set 1
- comments on 1
- obtaining 1
- E-series router models 1
- exchanging DVMRP unicast routes 1
F
- filtering
- DVMRP reports 1
G
- group membership
- queries 1, 2
- reports 1, 2
H
- hardware multicast packet replication
- configuring 1, 2
- monitoring 1, 2
- OIF mapping 1, 2
- overview 1, 2
- hello interval 1, 2
- PIM 1, 2, 3, 4, 5, 6, 7
- hold time
- PIM sparse mode 1, 2
- hop count 1
I
- icons defined, notice 1
- IGMP (Internet Group Management Protocol) 1
- configuring 1
- disabling 1
- enabling 1
- limiting groups on interfaces 1
- monitoring 1, 2, 3
- performing host functions 1
- querier 1
- removing 1
- specifying version 1, 2, 3
- igmp commands
- igmp disable 1
- igmp promiscuous 1
- IGMP proxy 1
- configuring 1
- enabling 1
- monitoring 1, 2
- version 1
- IGMP reports, accepting 1
- IGP (interior gateway protocol) 1
- importing routes. See redistributing routes 1
- Internet Group Management Protocol. See IGMP1
- investigating IP multicast routes 1
- IP addresses
- class D 1
- for multicasting 1
- ip commands
- ip block-multicast-sources 1
- ip multicast-routing 1, 2
- ip multicast-routing disable-rpf-check 1
- ip multicast-routing permanent-mroute 1
- ip route-type 1
- ip rpf-route 1
- ip unnumbered 1, 2
- mroute port limit 1, 2, 3, 4
- ip dvmrp commands
- ip dvmrp 1, 2
- ip dvmrp accept-filter 1
- ip dvmrp announce-list 1
- ip dvmrp auto-summary 1
- ip dvmrp disable 1
- ip dvmrp metric-offset 1
- ip dvmrp routehog-notification 1
- ip dvmrp route-limit 1
- ip dvmrp summary-address 1
- ip dvmrp unicast-routing 1
- See also show ip dvmrp commands1
- ip igmp commands
- ip igmp 1
- ip igmp access-group 1
- ip igmp access-source-group 1, 2, 3
- ip igmp group limit 1
- ip igmp immediate-leave 1
- ip igmp last-member query-interval 1
- ip igmp promiscuous 1
- ip igmp querier 1
- ip igmp querier-timeout 1
- ip igmp query-interval 1
- ip igmp query-max-response-time 1
- ip igmp robustness 1
- ip igmp ssm-map enable 1
- ip igmp ssm-map static 1
- ip igmp static-exclude 1
- ip igmp static-group 1
- ip igmp static-include 1
- ip igmp version 1, 2, 3
- ip igmp-proxy 1
- ip igmp-proxy unsolicited-report-interval 1
- ip igmp-proxy V1-router-present-time 1
- See also show ip igmp commands1
- ip multicast commands
- ip multicast admission-bandwidth-limit 1
- ip multicast ioa-packet-replication 1
- ip multicast-routing bandwidth-map 1
- IP multicast groups
- assigning to an interface 1
- identifying 1
- leaving 1
- maintaining membership of 1
- reporting 1
- specifying 1
- IP multicast interfaces, monitoring 1
- IP multicast routes 1
- IP multicasting
- benefits of 1
- deleting routes 1
- enabling 1
- M-BONE 1
- monitoring 1
- ip pim commands
- ip pim 1, 2
- ip pim bsr-candidate 1
- ip pim data-mdt 1
- ip pim group-address-pool 1
- ip pim join-filter 1
- ip pim query-interval 1
- ip pim rp-address 1
- ip pim rp-candidate 1
- ip pim send-rp-announce 1
- ip pim send-rp-discovery scope 1
- ip pim sparse-mode graceful-restart-duration 1
- ip pim spt-threshold 1
- See also show ip pim commands1, 2
- ip rip commands
- ip rip bfd-liveness-detection 1, 2
- IP tunnels
- monitoring 1
- ipv6 commands
- ip route-type 1
- ipv6 block-multicast-sources 1
- ipv6 mld robustness 1
- ipv6 multicast-routing 1
- ipv6 multicast-routing disable-rpf-check 1
- ipv6 multicast-routing permanent-route 1
- ipv6 rpf-route 1
- See also show ipv6 commands1
- ipv6 mld commands
- ipv6 mld 1
- ipv6 mld access-group 1
- ipv6 mld access-source-group 1
- ipv6 mld apply-oif-map 1
- ipv6 mld explicit-tracking 1
- ipv6 mld group limit 1
- ipv6 mld immediate-leave 1
- ipv6 mld last-member query-interval 1
- ipv6 mld oif-map 1
- ipv6 mld querier-timeout 1
- ipv6 mld query-interval 1
- ipv6 mld query-max-response-time 1
- ipv6 mld ssm-map enable 1
- ipv6 mld ssm-map static 1
- ipv6 mld static-exclude 1
- ipv6 mld static-group 1
- ipv6 mld static-include 1
- ipv6 mld version 1, 2, 3
- ipv6 mld-proxy 1
- ipv6 mld-proxy unsolicited-report-interval 1
- ipv6 mld-proxy version 1
- See also show ipv6 mld commands1
- IPv6 multicast
- benefits of 1
- deleting routes 1
- enabling 1
- monitoring 1
- ipv6 multicast commands
- ipv6 multicast admission-bandwidth-limit 1
- ipv6 multicast ioa-packet-replication 1
- ipv6 multicast-routing bandwidth-map 1
- IPv6 multicast groups
- assigning to an interface 1
- identifying 1
- leaving 1
- maintaining membership of 1
- reporting 1
- specifying 1
- ipv6 pim commands
- ipv6 pim 1
- ipv6 pim bsr-candidate 1
- ipv6 pim join-filter 1
- ipv6 pim query-interval 1
- ipv6 pim rp-address 1
- ipv6 pim rp-candidate 1
- ipv6 pim spt-threshold 1
- See also show ipv6 pim commands1, 2
J
- join messages 1, 2
- JUNOSe software CD 1
L
- leave group membership messages 1, 2
- leaving an IP multicast group 1
- leaving an IPv6 multicast group 1
- limiting IGMP groups on interfaces 1
- limiting MLD groups on interfaces 1
- liveness detection
- RIP and BFD 1, 2
M
- manuals, E-series and JUNOSe 1
- comments on 1
- M-BONE (multicast backbone of the Internet) 1
- MDT (Multicast Distribution Tree)
- creating with data MDT 1
- creating with default MDT 1
- mdt commands
- mdt-data-delay 1
- mdt-data-holddown 1
- mdt-data-timeout 1
- mdt-interval 1
- metric
- DVMRP 1
- MIBs (Management Information Bases) 1
- MLD (Multicast Listener Discovery) 1
- configuring 1
- disabling 1
- enabling 1
- limiting groups on interfaces 1
- monitoring 1
- performing host functions 1
- removing 1
- specifying version 1, 2
- mld disable command 1
- MLD proxy 1
- configuring 1
- enabling 1
- monitoring 1
- version 1
- models
- E120 1
- E320 1
- ERX-14xx 1
- ERX-310 1
- ERX-7xx 1
- mrinfo requests, support for 1
- mtrace command 1
- multicast
- IP. See IP multicasting1
- IPv6. See IPv6 multicast1
- Multicast Distribution Tree. See MDT1
- multicast group port limit command 1, 2
- Multicast Listener Discovery. See MLD1
- multicast VPNs
- creating with data MDTs 1
- creating with the default MDT 1
- overview 1
N
- neighbors, DVMRP 1
- notice icons defined 1
P
- PIM (Protocol Independent Multicast) 1, 2
- displaying events 1, 2
- enabling
- on a virtual router 1, 2
- on an interface 1, 2
- monitoring 1, 2, 3, 4, 5
- removing 1, 2
- resetting counters and mappings 1, 2
- using with DVMRP 1, 2
- using with IGMP 1
- using with MLD 1
- See also PIM dense mode; PIM sparse mode; PIM sparse-dense mode1
- PIM dense mode 1
- See also PIM1
- pim disable command 1, 2
- PIM DM. See PIM dense mode1
- PIM S-DM. See PIM sparse-dense mode1
- PIM SM. See PIM sparse mode1
- PIM sparse mode 1
- configuring auto-RP router 1
- hold time 1, 2
- joining groups 1, 2
- pruning 1, 2
- remote neighbors, configuring 1, 2
- setting a threshold 1, 2
- timers 1, 2
- PIM sparse-dense mode
- configuring auto-RP router 1
- overview 1
- PIM SSM (PIM source-specific multicast)
- enabling 1, 2
- requirements for IGMPv3 1
- requirements for MLDv2 1
- Protocol Independent Multicast. See PIM1
- prune messages 1, 2, 3
Q
- query-interval command 1
R
- reachability commands
- IP multicast 1
- redistribute command
- DVMRP 1
- redistributing routes, DVMRP 1
- redistribution routes
- disabling dynamic (DVMRP) 1
- release notes 1
- remote neighbors
- PIM sparse mode
- configuring 1, 2
- remote-neighbor command 1
- removing PIM 1, 2
- rendezvous point router. See RP routers1, 2
- reporting IP multicast groups 1
- reporting IPv6 multicast groups 1
- resetting PIM counters and mappings 1, 2
- reverse-path forwarding. See RPF1, 2, 3
- RIP (Routing Information Protocol)
- BFD liveness detection and 1, 2
- detecting path failures 1, 2
- purging learned routes 1, 2
- route-map command 1
- router commands
- router dvmrp 1, 2
- router igmp 1
- router mld 1
- router pim 1, 2, 3, 4
- routes
- using for other protocols 1, 2
- routing policy commands
- set admission-bandwidth 1
- set qos-bandwidth 1
- RP (rendezvous point) routers 1, 2
- assigning automatically 1
- configuring
- automatic 1
- static 1, 2
- RPF (reverse-path forwarding) 1, 2, 3
- RPF routes, monitoring 1, 2
S
- set threshold command 1
- setting
- baseline
- DVMRP 1
- IGMP 1
- IGMP Proxy 1
- MLD 1
- MLD Proxy 1
- DVMRP hop-count 1
- PIM SPT threshold
- IP 1
- IPv6 1
- shared trees 1, 2, 3, 4
- shortest path trees. See SRTs1, 2
- show ip commands
- show ip mroute 1
- show ip mroute count 1, 2, 3
- show ip mroute summary 1
- show ip rpf-route 1
- show ip dvmrp commands
- show ip dvmrp 1
- show ip dvmrp interface 1
- show ip dvmrp mroute 1
- show ip dvmrp neighbor 1
- show ip dvmrp route 1
- show ip dvmrp routeNextHop 1
- show ip igmp commands
- show ip igmp 1
- show ip igmp groups 1
- show ip igmp interface 1
- show ip igmp interface brief 1
- show ip igmp membership 1
- show ip igmp-proxy 1
- show ip igmp-proxy groups 1
- show ip igmp-proxy interface 1
- show ip multicast commands
- show ip multicast protocols 1
- show ip multicast protocols brief 1
- show ip multicast routing 1
- show ip pim commands
- show ip pim 1
- show ip pim auto-rp 1
- show ip pim bsr 1
- show ip pim data-mdt 1
- show ip pim dense-mode sg-state 1
- show ip pim interface 1
- show ip pim neighbor 1
- show ip pim rp 1
- show ip pim rp-hash 1
- show ip pim sparse-mode sg-state 1
- show ip pim sparse-mode unicast-route 1
- show ip pim spt-threshold 1
- show ipv6 commands
- show ipv6 mroute 1
- show ipv6 mroute count 1
- show ipv6 mroute summary 1
- show ipv6 rpf-route 1
- show ipv6 mld commands
- show ipv6 mld 1
- show ipv6 mld groups 1
- show ipv6 mld interface 1
- show ipv6 mld interface brief 1
- show ipv6 mld membership 1
- show ipv6 mld-proxy 1
- show ipv6 mld-proxy groups 1
- show ipv6 mld-proxy interface 1
- show ipv6 mld ssm-mapping command 1
- show ipv6 multicast commands
- show ipv6 multicast protocols 1
- show ipv6 multicast protocols brief 1
- show ipv6 multicast routing 1
- show ipv6 pim commands
- show ipv6 pim 1
- show ipv6 pim bsr 1
- show ipv6 pim interface 1
- show ipv6 pim neighbor 1
- show ipv6 pim remote-neighbor 1
- show ipv6 pim rp 1
- show ipv6 pim rp-hash 1
- show ipv6 pim sparse-mode sg-state 1
- show ipv6 pim sparse-mode unicast-route 1
- show ipv6 pim spt-threshold 1
- show multicast group limit command 1, 2
- software, installing or updating 1
- source-rooted trees. See SRTs1, 2
- specifying IP multicast groups 1
- specifying IPv6 multicast groups 1
- SPTs (shortest path trees). See SRTs1, 2
- SRTs (source-rooted trees) 1, 2, 3, 4, 5, 6
- static routes
- configuring 1, 2
- summary addresses
- DVMRP routing 1
- support, requesting 1
T
- technical support, requesting 1
- text and syntax conventions defined 1
- timers
- PIM sparse mode 1, 2
- trace packets 1
- tunnel group-address-pool command 1
- tunnel mdt command 1
U
- undebug commands
- undebug ip pim 1
- undebug ipv6 pim 1
- unicast routes, DVMRP 1
- update-source command 1
- upstream interface 1, 2
V
- vlan commands
- encapsulation vlan 1, 2