Disabling PIM on a VR

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

JUNOSe 9.1.x Multicast Routing Configuration Guide > Configuring PIM for IPv4 Multicast > Disabling PIM on a VR
Disabling PIM on a VR

To disable PIM processing on a router, use the pim disable command.

pim disable
Use to disable PIM processing. By default, PIM processing is enabled.

Example
host1:boston(config-router)#pim disable
Use the no version to reenable PIM processing.

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]