Triggering ANCP Line Configuration
Use the l2c line-configuration command to trigger line configuration to the access node. Issuing this command sends a GSMP port management message to the access node. This message enables the B-RAS to configure a service profile name on an access loop.
 |
NOTE: Before issuing the l2c line-configuration command, a profile must already be configured locally on the access node. |
l2c line-configuration
- Use to trigger a GSMP port management message to the access node. This message enables the B-RAS to configure a service profile name on an access loop.
- Example
host1#l2c line-configuration interface atm 2/0.11 profile1