JUNOSe 9.1.x IP, IPv6, and IGP Configuration Guide > Configuring IPv6 > Establishing a Static Route

Establishing a Static Route

You can set a destination to receive and send traffic by a specific route through the network.

ipv6 route

• Use to establish a static IPv6 route.
• You can set a destination to receive and send traffic from and to a network or to use a specific route through the network.
• Example

host1(config)#ipv6 route 7fff::0/16 1::1

• Use the no version of this command to remove a static route from the routing table.