JUNOSe 9.1.x Broadband Access Configuration Guide > Monitoring Subscriber Interfaces > Monitoring Subscriber Interfaces

Monitoring Subscriber Interfaces

Purpose

Display information about subscriber interfaces.

Action

To display subscriber interface information:

host1#show ip demux interface fastEthernet 2/0

Prefix/Length      SA/DA  Subscriber-Intf  VR/VRF        Description 

10.12.2.2/32       SA     ip subsc1       3              subsc1@test

10.12.2.3/32       SA     ip subsc2       3              subsc2@test

10.12.2.4/32       SA     ip subsc3       3              subsc3@test

10.12.2.5/32       SA     ip subsc4       3              subsc4@test

Meaning

Table 128 lists the show ip demux interface command output fields.

Table 128: show ip demux interface Output Fields 

Field Name	Field Description
Prefix/Length	Source or destination addresses that the subscriber interface demultiplexes
SA/DA	Demultiplexing method for subscriber interface
SA	Source address
DA	Destination address
Subscriber-Intf	Name of shared interface on which subscriber interface is configured
VR/VRF	Name of virtual router (VR) or VPN routing and forwarding (VRF) instance on which the subscriber interface is configured
Description	Text description for the IP interface on which subscriber interface is configured (added with the ip description command)

Related Topics

• show ip demux interface command