JUNOSe 9.1.x Broadband Access Configuration Guide > Monitoring and Troubleshooting Remote Access > Monitoring the Routing Table

Monitoring the Routing Table

Purpose

Display the current state of the routing table, including routes not used for forwarding. An Access-P entry in the Type column of the output indicates routes that are downloaded by the RADIUS route-download server.

Action

To display information in the routing table:

host1#show ip route

Protocol/Route type codes:

  I1- ISIS level 1, I2- ISIS level2,

  I- route type intra, IA- route type inter, E- route type external,

  i- metric type internal, e- metric type external,

  P- periodic download, O- OSPF, E1- external type 1, E2- external type2,

  N1- NSSA external type1, N2- NSSA external type2

  L- MPLS label, V- VRF, *- via indirect next-hop

Prefix/Length      Type       Next Hop      Dst/Met          Interface

------------------ --------- --------------- ---------- -----------------

0.0.0.0/0          Static    10.13.10.1      1/0        FastEthernet6/0/0 

192.168.10.0/23    Connect   10.13.10.187    0/0        FastEthernet6/0/0 

192.168.21.21/32   Access-P  255.255.255.255 254/2      null0 

192.168.22.22/32   Access-P  255.255.255.255 254/2      null0 

192.168.23.23/32   Access-P  255.255.255.255 254/2      null0 

192.168.24.24/32   Access-P  255.255.255.255 254/2      null0 

Meaning

Refer to the description of the show ip route command in JUNOSe IP, IPv6, and IGP Configuration Guide, Chapter 1, Configuring IP for additional information about the show ip route command.

Related Topics

• show ip route command