JUNOSe 9.1.x Broadband Access Configuration Guide > Monitoring and Troubleshooting Remote Access > Setting Baselines for Remote Access

Setting Baselines for Remote Access

You can set baseline statistics using the baseline commands. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline when you retrieve baseline-relative statistics.

Issue the delta keyword with the show aaa statistics command to show baselined statistics.

Setting a Baseline for AAA Statistics

You can set a baseline for all AAA statistics.

To set a baseline for AAA statistics:

• Issue the baseline aaa command:

host1#baseline aaa

There is no no version.

Setting a Baseline for AAA Route Downloads

To set a baseline for route downloads:

• Issue the baseline aaa route-download command:

host1#baseline aaa route-download 

There is no no version.

Setting a Baseline for COPS Statistics

To set a baseline for COPS statistics:

•                                 Issue the show cops statistics command:

host1#show cops statistics

There is no no version.

Setting a Baseline for Local Address Pool Statistics

To set a baseline for local address pool statistics:

• Issue the show local pool statistics command:

host1#show local pool statistics

There is no no version.

Setting a Baseline for RADIUS Statistics

To set a baseline for RADIUS statistics:

• Issue the show radius statistics command:

host1#show radius statistics

There is no no version.

Setting the Baseline for SRC Statistics

To set a baseline for SRC statistics:

• Issue the show sscc statistics command:

host#1how sscc statistics

There is no no version.

Related Topics

• baseline aaa command
• baseline aaa route-download command
• baseline cops command
• baseline local pool command
• baseline radius command
• baseline sscc command