Monitoring and Troubleshooting Remote Access
Use the commands in this chapter to set baselines for and to monitor remote access.
- Setting Baselines for Remote Access
- Monitoring AAA Accounting Configuration
- Monitoring AAA Accounting Default
- Monitoring Accounting Interval
- Monitoring Specific Virtual Router Groups
- Monitoring the Default AAA Authentication Method List
- Monitoring Domain and Realm Name Delimiters
- Monitoring Mapping Between User Domains and Virtual Routers
- Monitoring Tunnel Subscriber Authentication
- Monitoring Routing Table Address Lookup
- Monitoring the AAA Model
- Monitoring IP Addresses of Primary and Secondary DNS and WINS Name Servers
- Monitoring AAA Profile Configuration
- Monitoring Statistics about the RADIUS Route-Download Server
- Monitoring Routes Downloaded by the RADIUS Route-Download Server
- Monitoring Chassis-Wide Routes Downloaded by RADIUS Route-Download Servers
- Monitoring Authentication, Authorization, and Accounting Statistics
- Monitoring the Number of Active Subscribers Per Port
- Monitoring the Maximum Number of Active Subscribers Per Virtual Router
- Monitoring Session Timeouts
- Monitoring Interim Accounting for Users on the Virtual Router
- Monitoring Virtual Router Groups Configured for AAA Broadcast Accounting
- Monitoring Configuration Information for AAA Local Authentication
- Monitoring AAA Server Attributes
- Monitoring the COPS Layer Over SRC Connection
- Monitoring Statistics About the COPS Layer
- Monitoring Local Address Pool Aliases
- Monitoring Local Address Pools
- Monitoring Local Address Pool Statistics
- Monitoring Shared Local Address Pools
- Monitoring the Routing Table
- Monitoring the B-RAS License
- Monitoring the RADIUS Server Algorithm
- Monitoring RADIUS Override Settings
- Monitoring the RADIUS Rollover Configuration
- Monitoring RADIUS Server Information
- Monitoring RADIUS Services Statistics
- Monitoring RADIUS SNMP Traps
- Monitoring RADIUS Accounting for L2TP Tunnels
- Monitoring RADIUS UDP Checksums
- Monitoring RADIUS Server IP Addresses
- Monitoring SRC Client Connection Status
- Monitoring SRC Client Connection Statistics
- Monitoring the SRC Client Version Number
- Monitoring Subscriber Information
- Monitoring Application Terminate Reason Mappings
Use the following commands to monitor PPP interfaces:
For details on the show ppp commands, see JUNOSe Link Layer Configuration Guide, Chapter 7, Configuring Point-to-Point Protocol.
You can use the output filtering feature of the show command to include or exclude lines of output based on a text string you specify. For details, see JUNOSe System Basics Configuration Guide, Chapter 2, Command-Line Interface.
 |
NOTE: AAA and RADIUS statistics are not preserved across a warm restart when stateful SRP Switchover is enabled. |