JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > transmit-delay

transmit-delay

Description: 

Sets the estimated time it takes to transmit a link-state update packet on the OSPF remote-neighbor interface. The no version restores the default value.

Syntax: 

transmit-delay transmDelay

no transmit-delay

• transmDelay—Link-state transmit delay in seconds; a number in the range 0–3600; default value is 1

Mode(s): 

Remote Neighbor Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.