JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > timers spf

timers spf

Description: 

Configures the delay time between when OSPF receives a topology change and when it starts an SPF calculation and the hold time between two consecutive SPF calculations. The no version restores the default value.

Syntax: 

[ no ] timers spf holdTime

• holdTime—Number in the range 1–5 seconds; default value is 3; the hold time between consecutive SPF calculations

Mode(s): 

Router Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.