JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > timeout

timeout

Description: 

When used from RADIUS Configuration mode, specifies the interval, in seconds, before the router retransmits a RADIUS packet to an authentication or accounting server. The no version uses the default.

When used from RTR Configuration mode, specifies the timeout for a Response Time Reporter operation. The no version returns the operation to the default value. You can apply this parameter only to echo entries.

Syntax: 

RADIUS:

timeout waitTime

no timeout

• waitTime—Specifies the number of seconds in the range 3–30; default value is 3

RTR:

timeout timeoutValue

no timeout

• timeoutValue—Number in milliseconds that the operation waits for a response; if the value is set to 0 or is larger than frequency, it will be ignored; default value is 5000

Mode(s): 

RADIUS Configuration, RTR Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.