JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > vlan auto-configure

vlan auto-configure

Description: 

Specifies the types of dynamic upper interface encapsulations that are accepted or detected by a dynamic VLAN subinterface. You can issue this command repeatedly in Profile Configuration mode to include autodetection of multiple upper interface encapsulation types within the base profile for a dynamic VLAN subinterface. The no version terminates detection of the specified encapsulation type.

Syntax: 

vlan auto-configure upperInterfaceType [ lockout-time { minTime maxTime | none } ]

no vlan auto-configure upperInterfaceType [ lockout-time ]

• upperInterfaceType—One of the following dynamic encapsulation types:

• ip
• pppoe

• minTime—Minimum lockout time in the range 1–86400 seconds (24 hours); default value is 1 second
• maxTime—Maximum lockout time in the range 1–86400 seconds (24 hours); default value is 1 second
• none—Disables lockout time for the specified dynamic encapsulation type

Mode(s): 

Profile Configuration

Release Information: 

Command introduced in JUNOSe Release 7.1.0.
lockout-time keyword added in JUNOSe Release 7.3.0.