JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > snmp-server group

snmp-server group

Description: 

Dynamically configures an SNMP server group. The no version removes the dynamically created group.

NOTE: You must access the CLI at privilege level 15 to view or use this command.

Syntax: 

snmp-server group groupName securityModel authenticationLevel [ read readView ]
[ write writeView ] [ notify notifyView ] [ storageType ]

no snmp-server group groupName securityModel authenticationLevel

• groupName—Name of the SNMPv3 group
• securityModel—Security model

• v1—SNMPv1
• v2c—SNMPv2c
• usm—SNMPv3

• authenticationLevel—Method for authentication and privacy

• none—No authentication and no privacy
• auth—Authentication only
• priv—Authentication and privacy

• readView—Name of the view for read access; the default is no access
• writeView—Name of the view for write access; the default is no access
• notifyView—Name of the view for notification; the default is no access
• storageType—Storage type

• volatile—Loses contents on warm or cold start
• nonvolatile—Preserves contents across warm or cold start. This is the default.

Mode(s): 

Global Configuration

Release Information: 

Command introduced in JUNOSe Release 7.1.0.