JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show resource

show resource

Description: 

Displays statistical information about resources and their current threshold configurations.

Syntax: 

show resource [ [ if-type { atm-active-sub-if | atm-sub-if | atm-vc | ip | ppp-link }
[ system | slot slot ] ] | [ threshold [ trap [ status ] ] ]

• if-type—Indicates interface type; see Interface Types and Specifiers in About This Guide
• atm-active-sub-if—Active ATM subinterfaces
• atm-sub-if—Both active and inactive ATM subinterfaces
• atm-vc—ATM virtual circuits
• ip—IP interfaces
• ppp-link—PPP link interfaces
• system—All slots on the system
• slot—Number of the chassis slot in the range 0–2 (ERX-310 model), 0–6 (ERX-7xx models), and 0–13 (ERX-14xx models)
• threshold—Displays threshold information (optional keyword when used alone)
• trap—Displays threshold trap status
• status—Displays threshold trap status (optional keyword)

Mode(s): 

Privileged Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.