JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show pppoe interface lockout-time

show pppoe interface lockout-time

Description: 

In configurations with dynamic PPPoE subinterfaces over static PPPoE major interfaces, displays detailed information about the current encapsulation type lockout condition for each PPPoE client associated with the dynamic PPPoE subinterface column.

Syntax: 

show pppoe interface [ interfaceType interfaceSpecifier ] lockout-time [ filter ]

• interfaceType—One of the following interface types listed in Interface Types and Specifiers in About This Guide:

• atm
• fastEthernet
• gigabitEthernet
• lag
• serial—PPPoE is not currently supported on serial interfaces
• tenGigabitEthernet

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced in JUNOSe Release 7.2.0.