JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show mpls forwarding

show mpls forwarding

Description: 

Displays the MPLS forwarding table.

Syntax: 

show mpls forwarding
[ interface interfaceType interfaceSpecifier ] [ bgp | ldp | rsvp-te ]
[ label { atm vpi vci | labelNumber [ labelRangeEnd ] } ]
[ brief | bindings | bindings delta | delta ] [ filter ]

• interfaceType—Interface type; see Interface Types and Specifiers in About This Guide
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• bgp—Displays BGP-specific forwarding information
• ldp—Displays LDP-specific forwarding information
• rsvp-te—Displays RSVP-TE–specific forwarding information
• atm—Displays information for the specified ATM VPI/VCI labels

• vpi—Specifies ATM VPI that partially designates a label
• vci—Specifies ATM VCI that partially designates a label

• labelNumber—Label number, in the range 16–1048575
• labelRangeEnd—Number, in the range 16–1048575, that specifies the high end of a range of labels
• brief—Displays only brief or summary information about the tunnels
• bindings—Displays protocol-specific label-to-FEC bindings
• detail—Displays detailed information
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.

    Related Topics    

• Monitoring LDP-Related Settings for VPLS
• Monitoring MPLS Forwarding for Layer 2 Services over MPLS
• Monitoring MPLS Forwarding State for L2VPN (VPWS) Instances