JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show l2tp session

show l2tp session

Description: 

Displays detailed information about selected L2TP sessions or summary information for all L2TP sessions.

Syntax: 

show l2tp session [ detail ] [ state { adminState | ifOperStatus } ]
[ l2tpName | [ virtual-router vrName ] ip ipAddress [ l2tpNameNoDest ] ] [ filter ]

To display summary information:

show l2tp session summary [ filter ]

• detail—Provides complete information about the specified sessions
• state—Restricts display to sessions in a specific state
• adminState—Effective administrative state
• ifOperStatus—Operational state
• l2tpName—Session name
• vrName—Name of the virtual router on which the session exists
• ipAddress—IP address
• l2tpNameNoDest—Name of the session
• filter—See Filtering show Commands in About This Guide
• summary—Displays the configured and operational status of all L2TP sessions

Mode(s): 

Privileged Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.