JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show ip tunnel-route

show ip tunnel-route

Description: 

Displays current state of the IPv4 tunnel routing table.

Syntax: 

show ip tunnel-route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ]
[ all ] [ protocol ] [ filter ]

• vrfName—Contents of the IPv4 tunnel routing table associated with a VRF
• destination—IP address or domain name of the host to show
• ipMask—IP mask of the specific address to show
• detail—Displays detailed information about the specific prefix
• all—Displays all routes in the IPv4 tunnel routing table inserted from all protocols, not just the best routes
• protocol—One of the following protocols for which you want to display the best route or all routes in the tunnel routing table; no routes are displayed if routes for the specified protocol are not present in the tunnel routing table
  

  NOTE: Other protocol options are available in the CLI, but they are not applicable to the tunnel routing table.

  
  

• bgp-tunnel—Displays the BGP tunnel routes in the tunnel routing table
• ldp—Displays the LDP tunnel routes in the tunnel routing table
• rsvp—Displays the RSVP tunnel routes in the tunnel routing table

• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced in JUNOSe Release 7.1.0.