JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show ip bgp flap-statistics

show ip bgp flap-statistics

Description: 

Displays information about routes that are dampened.

Syntax: 

To display information about dampened routes for address families other than the L2VPN and route-target signaling address families:

show ip bgp
[ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ] flap-statistics
[ network [ networkMask ] ] [ filter ]

To display information about dampened routes for only the route-target signaling address family:

show ip bgp route-target signaling flap-statistics [ rtfPrefix | rtfAddress ] [ filter ]

To display information about dampened routes for only the L2VPN address family:

show ip bgp
{ l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName } flap-statistics
[ site-id siteId block-offset blockOffset ] [ filter ]

• ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the default option
• ipv4 multicast—Specifies the IPv4 multicast address family and routing table
• vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and forwarding instances
• vpvn4 vrf vrfName—Specifies the IPv4 VPN address family and only the IPv4 VPN routing and forwarding instance with the name vrfName
• network—IP address of the network for which you want information displayed; if no network is specified, the fields are displayed for all networks
• networkMask—Address mask to be applied to the network address
• route-target signaling—Displays information for only the route-target address family
• rtfPrefix—Prefix representing the route-target membership NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity/prefixLength (for example, 320:320:524/36) where:

• asNumber—AS number for origin of route target information, in the range 1–4294967295
• extendedCommunity—Two-part number in the format number1:number2 that identifies an extended community of VPNs, in the format number1:number2, where:

• number1—Autonomous system (AS) number, in the range 1–4294967295, or an IP address
• number2—Unique integer, in the range 1–4294967295; 32 bits if number1 is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS number

• prefixLength—Number that specifies the length of the route prefix, in the range 32–96

• rtfAddress—rtfPrefix with a prefix length of 96; representing the route-target membership NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity (for example, 320:320:524 or 320:50.2.3.4:524)
• l2vpn all—Specifies all VPLS instances in the L2VPN address family
• l2vpn vpls vplsName—Specifies the VPLS instance with the name vplsName
• l2vpn vpws vpwsName—Specifies the L2VPN (VPWS) instance with the name vpwsName
• siteId—Numerical identifier for the site; must be an unsigned 16-bit integer greater than zero that is unique across the VPLS domain
• blockOffset—Integer in the range 1–65535 that identifies a block offset for which information is displayed
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.
l2vpn and all keywords added in JUNOSe Release 7.1.0.
vpls keyword and vplsName variable added in JUNOSe Release 7.1.0.
site-id keyword and siteId variable added in JUNOSe Release 7.1.0.
block-offset keyword and blockOffset variable added in JUNOSe Release 7.1.0.
vpws keyword and vpwsName variable added in JUNOSe Release 8.1.0.
route-target signaling keywords and rtMemNlri variable added in JUNOSe Release 8.2.0.
rtMemNlri variable replaced by two variables, rtfAddress and rtfPrefix, in JUNOSe Release 9.1.0.

    Related Topics    

• Monitoring BGP-Related Settings for L2VPNs