JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show adjustment-factor

show adjustment-factor

Description: 

Displays the configured QoS adjustment factor that is applied to the ANCP-reported downstream and upstream data rate for all DSL line types or for the specified DSL line types.

Syntax: 

show adjustment-factor [ adsl1 | adsl2 | adsl2+ | vdsl | vdsl2 | sds ]

• dslType—Type of DSL line for which the QoS adjustment rate is displayed: adsl1, adsl2, adsl2+, vdsl, vdsl2, or sds

Mode(s): 

L2C Configuration

Release Information: 

Command introduced in JUNOSe Release 9.1.0.