JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > ospf auto-cost reference-bandwidth

ospf auto-cost reference-bandwidth

Description: 

Controls how OSPF calculates default metrics for the interface. The no version assigns cost based only on the interface type.

Syntax: 

[ no ] ospf auto-cost reference-bandwidth refBw

• refBw—Bandwidth in megabits per second, in the range 1–4294967; default value is 100

Mode(s): 

Router Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.