JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path trigger delay

path trigger delay

Description: 

Specifies the time duration that the router uses to determine when a SONET/SDH defect at the path layer becomes an alarm. The no version restores the default setting, 2500 milliseconds.

Syntax: 

For channelized OCx/STMx interfaces:

path pathChannel trigger delay msec delayTime

no path pathChannel trigger delay

For unchannelized OCx/STMx interfaces:

path trigger delay msec delayTime

no path trigger delay

• pathChannel—Number, in the range 1–2147483648, that identifies the path on a channelized interface
• delayTime—Time, in the range 0–2500 milliseconds

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.