JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path shutdown

path shutdown

Description: 

Disables a path on channelized and unchannelized SONET/SDH interfaces. On channelized interfaces, you must specify the path channel number. By default, paths are enabled. The no version restarts the path.

Syntax: 

For channelized OCx/STMx interfaces:

[ no ] path pathChannel shutdown

For unchannelized OCx/STMx interfaces:

[ no ] path shutdown

• pathChannel—Number, in the range 1–2147483648, that identifies the path on a channelized interface

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.