JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds3 t1 framing

path ds3 t1 framing

Description: 

Configures the framing format for a T1 channel on a DS3 signal. This command applies to a T1 channel on a DS3 over channelized SONET interface. The no version restores the default value.

Syntax: 

path pathChannel ds3 ds3Channel t1 t1Channel framing framingType

no path pathChannel ds3 ds3Channel t1 t1Channel framing

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
• t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
• framingType—One of the following types:

• esf—Default; specifies extended superframe
• sf—Specifies superframe

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.