JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds3 snmp trap link-status

path ds3 snmp trap link-status

Description: 

Enables SNMP link status processing for a DS3 signal. This command applies to a DS3 over channelized SONET interface. The no version disables SNMP link status processing on an interface.

Syntax: 

[ no ] path pathChannel ds3 ds3Channel snmp trap link-status

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• ds3Channel—Number, in the range 1–3, that identifies the path

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.