JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds3 shutdown

path ds3 shutdown

Description: 

Disables a DS3 signal. This command applies to a DS3 over channelized SONET interface. DS3 interfaces are enabled by default. The no version restarts a disabled interface.

Syntax: 

[ no ] path pathChannel ds3 ds3Channel shutdown

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• ds3Channel—Number, in the range 1–3, that identifies the path

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.