JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path ds1 fdl

path ds1 fdl

Description: 

Specifies the FDL standard for a DS1 signal when DS1 is configured over a channelized SONET or SDH interface. The no version restores the default, none.

Syntax: 

path pathChannel ds1 tributaryIdentifier fdl { ansi | att | all | none }

no path pathChannel ds1 tributaryIdentifier fdl [ ansi | att | all ]

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Identifier for the tributary. See description for the path ds1|e1 command.
• ansi—Specifies ANSI T1.403 Standard for extended superframe FDL exchange support
• att—Specifies AT&T Technical Reference 54016 for extended superframe FDL exchange support
• all—Specifies both the AT&T and ANSI mode for extended superframe FDL exchange support
• none—Removes the current FDL mode settings

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.