JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > rtr reaction-configuration test-failure

rtr reaction-configuration test-failure

Description: 

Enables test failure reaction to occur. When the type of RTR entry is echo, you can also configure a value that triggers the test-failure trap. There is no no version. See the no rtr reaction-configuration command.

Syntax: 

rtr reaction-configuration rtrIndex test-failure [ testFailureValue ]

• rtrIndex—Number of the operation to be configured, in the range 1–4294967295; no default
• testFailureValue—Number, in the range 0–15; default value is 1

Mode(s): 

Global Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.