JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > radius trap no-auth-server-responding

radius trap no-auth-server-responding

Description: 

Enables or disables SNMP traps when all the configured RADIUS authentication servers per VR fail to respond to a RADIUS Access-Request message. The no version restores the default, disable.

Syntax: 

radius trap no-auth-server-responding { enable | disable }

no radius trap no-auth-server-responding

• enable—Specifies the feature
• disable—Disables the feature; this is the default setting

Mode(s): 

Global Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.