JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > radius rollover-on-reject

radius rollover-on-reject

Description: 

On a virtual router, specifies whether the router should roll over to the next RADIUS server when the router receives an access-reject message for the user it is authenticating. The no version restores the default value, disable.

Syntax: 

radius rollover-on-reject { enable | disable }

no radius rollover-on-reject

• enable—Specifies the feature
• disable—Disables the feature; this is the default setting

Mode(s): 

Global Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.