[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > radius relay udp-checksum

radius relay udp-checksum

Description: 

Enables or disables UDP checksum for RADIUS relay packets on virtual routers that you configure for B-RAS. The no version restores the default value, enable.

Syntax: 

radius relay udp-checksum { enable | disable }

no radius relay udp-checksum

Mode(s): 

Global Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]