JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > query-interval

query-interval

Description: 

Specifies how often the router sends PIM router query messages to remote neighbors. The no version specifies the default time interval, 30 seconds.

NOTE: This command is typically used when you configure PIM remote neighbors to run multicast services over BGP/MPLS VPNs. That functionality is no longer supported.

Syntax: 

query-interval queryTime

no query-interval

• queryTime—Interval, in the range 0–210 seconds, at which the router sends PIM router query messages from this interface

Mode(s): 

Interface Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.