JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > protocol rate

protocol rate

Description: 

Sets the maximum rate for the specified protocol. The no version sets the rate to the value of the associated preconfigured protocol.

Syntax: 

protocol protocolValue rate rateValue

no protocol protocolValue rate

• protocolValue—Name of the protocol
• rateValue—Packets per second per line card, in the range 64–65335

Mode(s): 

DoS Protection Group Configuration

Release Information: 

Command introduced in JUNOSe Release 8.1.0.