JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > pppoe remote-circuit-id

pppoe remote-circuit-id

Description: 

Enables a static or dynamic PPPoE interface on the router to capture and process a vendor-specific tag containing a remote circuit ID transmitted from a DSLAM device. The router can then send this value to a RADIUS server or to an L2TP network server (LNS) to uniquely identify subscriber locations. The no version restores the default behavior, which is not to capture and process the remote circuit ID.

Syntax: 

[ no ] pppoe remote-circuit-id

Mode(s): 

Interface Configuration, Profile Configuration, Subinterface Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.