JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mirror disable

mirror disable

Description: 

Disables a packet mirroring session that was dynamically configured for a subscriber; uses the trigger information to identify the subscriber's session. There is no no version.

Syntax: 

mirror disable triggerType triggerValue

• triggerType—One of the following RADIUS attributes that was used as the trigger to start the packet mirroring session

• acct-session-id—Acct-Session-ID (RADIUS attribute 44)
• calling-station-id—Calling-Station-ID (RADIUS attribute 31)
• ip-address—Framed-IP-Address (RADIUS attribute 8)
• nas-port-id—NAS-Port-ID (RADIUS attribute 87)
• username—User-Name (RADIUS attribute 1)

• triggerValue—Value of the triggerType (the specified RADIUS attribute) that identifies the subscriber

Mode(s): 

Privileged Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.
nas-port-id added in JUNOSe Release 7.1.0.

    Related Topics    

• Configuring CLI-Based Mirroring
• Configuring RADIUS-Based Mirroring