JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mdl transmit

mdl transmit

Description: 

Transmits an MDL message from a T3 interface. The no version disables transmission of the specified MDL message or all MDL messages.

Syntax: 

[ no ] mdl transmit { path-id | idle-signal | test signal }

no mdl transmit

• path-id—Transmits a path identification message every second; default value is disabled
• idle-signal—Transmits an idle signal message every second; default value is disabled
• test-signal—Transmits a test signal message every second; default value is disabled

Mode(s): 

Controller Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.