JUNOSe 9.1.x Command Reference Guide A to M > M Commands > max-response-failure

max-response-failure

Description: 

Terminates a test when the maxFailureValue is reached. That is, when there is no response to a designated number of operation requests, the test is terminated. This feature applies only to pathEcho entries. The no version restores the default value, five consecutive failures.

Syntax: 

max-response-failure maxFailureValue

no max-response-failure

• maxFailureValue—Number of operation requests not responded to; 0 turns this feature off; default value is 5

Mode(s): 

RTR Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.