JUNOSe 9.1.x Command Reference Guide A to M > M Commands > match ipv6 address

match ipv6 address

Description: 

Matches any routes that have a destination network number address that is permitted by an access list or prefix list. The no version removes all address match clauses from a route map unless you specify either an access list or a prefix list, in which case only the list match is removed from the route map.

Syntax: 

match ipv6 address
{ accessListName [ accessListName ]* | prefix-list prefixListName [ prefixListName ]* }

no match ipv6 address [ [ accessListName ]* | prefix-list [ prefixListName ]* ]

• accessListName—String of up to 32 alphanumeric characters
• prefixListName—Name of a single prefix list; string of up to 32 characters
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line

Mode(s): 

Policy List Configuration, Route Map Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.