JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mask-val

mask-val

Description: 

Sets the mask value. For rate limits, use this command with the committed-action, conformed-action, and exceeded-action commands. For color-mark profiles, use the mask-val command in Color Mark Profile Configuration mode. The no version restores the default value, 255.

Syntax: 

[ no ] mask-val value

• value—Mask value in the range 0–255. Use the following mask values to set the appropriate bits in the ToS field of the IP packet header:

• IP Precedence—0xE0 (three most significant bits)
• DS Field—0xFC (six significant bits)
• TOS (IP) or Traffic Class field (IPv6)—0xFF (default)

Mode(s): 

Color Mark Profile Configuration, Rate Limit Profile Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.
Color Mark Profile Configuration mode added in JUNOSe Release 7.2.0.

    Related Topics    

• Creating a Two-Rate Rate-Limit Profile
• Setting the Mask Value for MPLS Rate-Limit Profiles
• Setting the Mask Value for IP and IPv6 Rate-Limit Profiles