JUNOSe 9.1.x Command Reference Guide A to M > M Commands > mpls ldp profile

mpls ldp profile

Description: 

In Global Configuration mode, creates or modifies a configuration profile for the LDP. Places the CLI in LDP Profile Configuration mode. If you do not specify a profile name, the factory default profile is assumed. The no version deletes the specified profile.

In Interface Configuration mode, creates or enables LDP on the interface with the factory default profile or the specified profile. The no version reverts to the default profile on the interface.

Syntax: 

In Global Configuration mode:

mpls ldp [ interface ] profile [ profileName ]

no mpls ldp interface profile profileName

In Interface Configuration mode:

mpls ldp profile profileName

no mpls ldp profile

• interface—Keyword required for the no version in Global Configuration mode
• profileName—Name of a profile to be created or modified (Global Configuration mode), applied to an interface (Interface Configuration mode), or deleted (both modes); the profile sets the values for the protocol parameters; until you modify the profile settings, the values match those of the implicit default profile

Mode(s): 

Global Configuration, Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.