JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip dvmrp accept-filter

ip dvmrp accept-filter

Description: 

Filters incoming DVMRP reports in accordance with a standard IP access list. The no version disables the filter.

Syntax: 

[ no ] ip dvmrp accept-filter listName1 [ distance ] neighbor-list listName2

• listName1—Name of the IP access list. If the name is 0, the interface accepts all destinations. You can specify a simple or extended access list; with an extended access list you can specify an address and a subnet mask.
• distance—Number in the range 0–255; default value is 0; the distance associated with the DVMRP route when the router determines the RPF interface for the source of a multicast packet
• listName2—Name of an access list containing the neighbors from which the router will accept reports. If the name is 0, the interface accepts destinations from all its neighbors.

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.