JUNOSe 9.1.x Command Reference Guide A to M > I Commands > interface tunnel

interface tunnel

Description: 

Creates a tunnel interface for use by DVMRP, GRE, IPSec, or MPLS. You can specify that the tunnel be established in the routing space of a virtual router other than the current VR. If you specify another VR, all tunnel commands apply to the tunnel in that VR. If you do not specify another VR, tunnel commands apply to the current VR. For DVMRP and GRE tunnels, you can specify that the tunnel be protected with IPSec in transport mode. The no version removes the tunnel interface.

Syntax: 

[ no ] interface tunnel interfaceSpecifier [ transport-virtual-router vrName ] [ ipsec-transport ]

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• vrName—Name of virtual router (other than the current VR) in which the tunnel will be established
• ipsec-transport—Indicates that the tunnel is protected with IPSec in transport mode; used for GRE or DVMRP tunnels only

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.