JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ipv6 pim spt-threshold

ipv6 pim spt-threshold

Description: 

Specifies the network configuration that PIM sparse mode uses when a source starts sending multicast messages. The no version restores the default value, 0.

Syntax: 

[ no ] ipv6 pim spt-threshold { 0 | nonZeroInteger | infinity } [ group-list ipv6AccessList ]

• 0—Configures PIM sparse mode to switch to an SPT when a source begins to send multicast messages
• nonZeroInteger—Integer in the range 1–4294967294; prevents PIM sparse mode from switching from a shared tree to an SPT
• infinity—Prevents PIM sparse mode from switching from a shared tree to an SPT
• ipv6AccessList—Name of the IPv6 access list that specifies the groups to which the threshold applies

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.